Skylights can be added to any roof surface to be considered in energy or daylight modelling. Where compliance calculations are being undertaken, the Reference Building skylight is nominated s per the local Building Code.
Add skylights by selecting ‘Draw Skylight’ in the drawing space ribbon of the roof. Left-click the starting point of the skylight and hold and drag to the endpoint, then drag to the desired length of the skylight and hit 'Save'.
Note: Skylights much be directly above a Zone and cannot be above two Zones, crossing over an internal wall. It is generally ok to add up to 5 Skylights per zone. A roof may need to be split into multiple roofs to add more than 5 skylights.